By
@Aaditya
Its a custom built 5-inch FPV drone, with a carbon fiber chassis and 3D printed TPU pads, with everything blacked out, but the motors and landing pads hot pink
20m 1s logged
Still trying, but I can’t find the option to turn off AMS
1h 24m logged
I finished my landing pads, and I tried to slice them on Bambu Studio, but I couldn’t turn off AMS, and I couldn’t select the TPU option because of that. Ill figure that out later.
40m logged
(っ °Д °;)っ I just realized that I still need to make the 3D printed parts. So, I grinded the camera mount that will fit between the spacers
1h 29m logged
I finished the frame and I got in some cool 3D Renders too!
.png)
24m logged
Finished the frame, and I created all the plates. I also added all the screw holes. I had to move the flight stack to the back though, and I might need more wire for the motors to connect to it. I actually had 2hrs and 15min that wasn’t able to get logged. For the first bit, after I finished and was ready to save the timelapse, I got an error saying that if failed. this was when I created the bottom plate and added screw holes. then, I spent more time the next day creating the plates, ad adding holes for that. This time, I accidentally closed the tab, and I couldn’t submit my timelapse. I have a screenshot of that timelapse, but I can’t submit it anymore. so, my time spent on this project is the shown time + 2hr 15min
1h 6m logged
I added all the screw holes and made the arms! YAY! But… I had to change out my motors for slightly more expensive ones that are a little less sketchy, and didn’t have the screw holes in random places without even saying what screws they used. And, the motors are hot pink, so thats gonna be my color theme! Im going to black everything out, and then have the motors and the landing pads (will make later, as they can be 3D printed out of TPU) hot pink.
2h 5m logged
I figured out what I wanted to make, and I started it. I watched a video about building a drone, and i found all my parts. I also started on making my drone chassis in blender. I started making one of the arms today. I made them so they would perfectly converge in the middle in a square shape, so that the plates would be able to connect to them easily and firmly. Now, I just need to add the screw holes to finish the arms
