@leg1231

FINAL DEV LOG, hopefully. I just finished making all the instruction videos. finished up the github, made a demo video (https://www.youtube.com/shorts/hctG1Nq7Nto). shipping in 3, 2, 1.

I broke it again!!!! hopefully the last time. I found out why though, it would lose signal and not stop the motors so would just crash into whatever it was headed toward. Im doing some final details now, including making sure my remote doesn’t just turn off:)

• increasing infill
• worked on upper chassi

IT FINALLY WORKS!!!! still have alot to do but it can move and steer on its own.

• made the final circuit board( small form factor
• working on final placment of componets

Its starting to look Cool!!!! you can now see why i called it wierd looking f1 car, half the engine area is just a motor

It only looks a little sus. next thing to do is finish the body and work on wiring. I was about to do the first full test then realized the battery was dead. ILL BE BACK

• temporrary wiring
• slgiht bend in chassi

I replaced the 3d printed axles with steel rods, then remade the main chassy to be more sturdy, then the front stearring broke. so much fun : |

This is the full size of it. i ran the motors and the rear axel limitedly snapped. It couldn’t handle the torque :(

Fully assembled front stearing. V1

hopefully done with the steering and front wheel base

Working on the front stearing struts and part of the body( this is half, ill mirror it once I like how it is working)

Started working on front steering. Each wheel will steer individually so that i can test both postive ackermen and reverse ackermen stearing

from a cad file to physical

first dev log, some of this was done during the school year, ive had to do multiple ideration of gear space a so on. drive train of car, all 3d printed