@Fyre63

I added some holes for the screws to go through. They are M3x16 mm screws so I made each corner hole with a diameter of 3.3mm. I’m not sure how this’ll work but if you see any errors that will cause issues please let me know!

I’m making the case for the Hackpad but I’m a little confused. I know I need the opening or the usb and I need the screw mounts, but do I add a ledge or area for the pcb to hang on or just let it free sit in the case?

Finished designing the PCB for my macropad. It is going to have six buttons, one for each direction then two extra, and a rotary controller for volume. Let me know if anything should be changed!

I have almost finished the PCB for my Macropad design. I am currently having a small issue with a silkscreen being clipped by a solder mask by the Xiao Seeduino. I’m hoping to get this issue fixed soon so that way i can begin working on the case.

My Hackpad

I just finished the PCB steps for the macropad but I’m not sure if everything is correct, so if you have any criticism or ideas for me, feel free to send them! Also, there are more wires on the backside as well as diodes, but I couldn’t post two images on one devlog