Six Button Macropad
- 2 Devlogs
- 5 Total hours
A nice and simple Macropad with six buttons and a rotary encoder
Made the case for the Macropad! The top piece gave me some problems for a while because the plate I generated for it was way too small too fit, so i had to manually measure everything in KiCad to get it all fitting nice. After this, I just need to write some code for it and then I can finally put it all together!
Finished designing the PCB for my macropad. It is going to have six buttons, one for each direction then two extra, and a rotary controller for volume. Let me know if anything should be changed!
