hek-pad
Hardware- 4 Devlogs
- 9 Total hours
I’m building a hack-pad called Hek-pad. It can do stuff like shortcuts, control volume and brightness, take screenshots etc.
I did a lot of work, I printed out the schem sheet and matched it with the actual dimensions and all, but the prb is I didn’t realize that the keyboard switches were too far apart… I have to delete all the wiring before shifting the keyboard switches back and then rewiring….. HELP
.png)
.png)
.png)
.png)
i fixed up the neo-pixel problem, i miss took the tiny leds for the ws2812b kind, so i fixed that and the project passed the E.R.C.
.png)
i fixed the matrix. im trying to fix the slider pin value problems. i will start the 3d modleing or coding next.
.png)
started schematics I’m thinking of adding a diode in the key matrix layout so that there is no ghosting in the hek-pad. I wont be able to do much because of my exams. I will get back on as soon as the exams are over.
.png)