@krisander

I did a lot of work, I printed out the schem sheet and matched it with the actual dimensions and all, but the prb is I didn’t realize that the keyboard switches were too far apart… I have to delete all the wiring before shifting the keyboard switches back and then rewiring….. HELP

i fixed up the neo-pixel problem, i miss took the tiny leds for the ws2812b kind, so i fixed that and the project passed the E.R.C.

i fixed the matrix. im trying to fix the slider pin value problems. i will start the 3d modleing or coding next.

started schematics I’m thinking of adding a diode in the key matrix layout so that there is no ghosting in the hek-pad. I wont be able to do much because of my exams. I will get back on as soon as the exams are over.

i finished all the PCB Editing in about 5 hours!! I’m gonna put the PCB files on github soon. I”ll also send it for reshipping… hopefully it will be accepted.

i fixed the schematics of the board. I added switches and labeled everything. I ran through the tests and it passed perfect.

I found out i have to create a pcb so I’m doing it.

i restarted programming the code and I’m trying to make the audio latency as low as possible, I’m using my home wifi to connect esp32s along with clock.. I also got a new pc yayyy!!!!!

I started building the transimtter side of the ESP32.

im working on aa new project called tab-tamer, as a part of frictionless. I got this cute extension called cat face on vs code that gets happier the more errors i correct!

got the project working as an extension, i will make it actualy work in the span of about 10 days, i wont be albe to do as much because of my exams.

I just dropped version 1.3 of the esp-pod on github , go check it out!

I’m currently fixing the keyboard navigation, and adding code to rename artists as well. I will update agian after fixing it.

this is a small metall detector built based on the bc547 transistor, it uses a electro magnitic coil to detect fluctuations caused by metal and amplifies the siginal into a led and buzzer.

just uploaded build montage on lapse go check it out

I added code so that i can rename songs through the player but i have to clike abt 52 times per letter becaue the screen size and buttons are limited . If you have any ideas on optmizing the typing please feel free to suggest it in the comments!

I finished ver1.3, currenty debugging errors in ver1.3… Ill do a timlapse soon stay tuned for the hardware build montage!

ok so the project works but i complete forgt to add the logic part of renaming songs etc, i deleted about 200 lines of code to update it. ill will post a breadboard prototype after fixing this version of code