GlitchPad
Hardware- 5 Devlogs
- 5 Total hours
GlitchPad is a hackpad inspired by the movie Matrix
Great work on this ! I have a few more changes you need to do though !
In your production folder, please also add the gerbers as ONE zipped up file for easy access to anyone trying to manufacture your PCB. As for your CAD files, instead of one overall .step file, make a step file for ALL your 3d printed parts for easy access ! This lets ppl immediately import each part to the slicing software. Then you gotta add your final compiled firmware file so anyone can flash their microcontroller with ease :D.
Devlog #5 Hello everyone! I have tweaked the design a bit and I have updated the repo
Hi, great work! before i can approve this you need to fix a few things first! Please add a production folder in the repo (not a zip) with your final CAD, gerber and firmware files! Next please create a PCB, Firmware and CAD folders with their following files! Finally create a BOM.csv (bill of materials)! Use this guide if you need :D https://hackpad.hackclub.com/guide
*Devlog #4 Hello everyone! Today I have finished the 3D model and I will submit to funding later.
Devlog 3 Hello everyone I have finished the PCB and will continue with CAD. I added BME280 just for fun
Devlog 2 : continued building the PCB
Devlog 1 Hello everyone I decided that doing Blare Phone Locker everyday is boring so I decided to continue on another project. This is GlitchPad It contain an ESP32, a buzzer, an OLED screen, rotary encoder and 5 button. I’m planning the OLED screen will show the matrix like that cool number falling down or whatever and everytime you click the button the buzzer will buzz and for the rotary encoder……. Idk but I will continue tomorrow. The picture below show the schematic
