@rapidSpeed

Completed building the pcb. Im trying to add something custom to the pcb, like writings on it or logo sm. Idk what to put, maybe a minecraft logo? I think i should try doing the same for MinePad.

Beautiful flight

Js look at the way it flies bro i can NOT its way too smooth

This was my first time actually flying with a flight computer and god damm was it a good experience, everything was so easy and i wasnt scared of flying it too far as i had setup RTL earlier

Unfortunately the bad news is that i had 3 flights with this plane, and in the final flight i was tryna autotune it and mid flight the motor came off the mount and fell in the ground (yes it was 70m above the ground when it happened) thankfully the goated pixhawk was able to save the plane, also i had full control over it so i was able to land the plane safely

After further inspection i figured out that the motor heat had melted the PLA mount and made the countersink screws act like wedges in wood and it js came clean off 😭 I did NOT expect that bro.

Since then i have asked for a bump and also i made the mount much thicker and in todays flight i will be ziptying the motor on

Apart form that i also changed the tail for standard configuration to a V tail, currently the elevator hits the carbon boom which reduces the throw, thsi Vtail is much sturdy and cleaner lets hope for the best in todays flight

Thanks for the reviews! They gave a lot of insight on how to improve the OS. So, I have made it such that windows opened near the cursor and added the calc application!
I will start working on improving the journel app too.

I have been wondering if I should add a music player pre loaded with minecraft songs. What do yall think?

Thanks for the reviews! They gave a lot of insight on how to improve the OS. So, I have made it such that windows opened near the cursor and added the calc application!
I will start working on improving the journel app too.

I have been wondering if I should add a music player pre loaded with minecraft songs. What do yall think?

I completed coding the firmware, its pretty confusing for which I needed AI for helping me. But I think i have understood how it works.

Anyways, I am done designing the macropad. I wrote the README with reference to the Orpheuspad . I am going to submit today. Hopefully, it will get approved.

I completed coding the firmware, its pretty confusing for which I needed AI for helping me. But I think i have understood how it works.

Anyways, I am done designing the macropad. I wrote the README with reference to the Orpheuspad . I am going to submit today. Hopefully, it will get approved.

Adding the title was so hard!! AI was hallucinating, so I had to find the solution on my own. I think its pretty

Thanks to @ahmedtantawy832, they helped me on how to add the title onto the case. I am gonna start working on the firmware, which looks very scary

Adding the title was so hard!! AI was hallucinating, so I had to find the solution on my own. I think its pretty

Thanks to @ahmedtantawy832, they helped me on how to add the title onto the case. I am gonna start working on the firmware, which looks very scary

Switched from Fusion to Onshape becus i switched to linux hehe :D

Anywho, I completed the case and will start coding the firmware soon. Tbh, Onshape is not bad either and its kinda better since we dont have limits on how many project we can work on unlike Fusion.

Switched from Fusion to Onshape becus i switched to linux hehe :D

Anywho, I completed the case and will start coding the firmware soon. Tbh, Onshape is not bad either and its kinda better since we dont have limits on how many project we can work on unlike Fusion.

I started working on the case. Also btw i added another key and a knob to be more unique yk .

Tbh, fusion is the best cad software i have ever used, and u can see i have seen many from the time i have spent on my keyboard

I completed the PCB. It was pretty easy since I have a lot of experience from the KEEB ysws (i couldnt submit on time btw).

Idk why the guide did not have problems with the key pins overlapping with the microcontroller, well i had. So, I had to put it on the side, due to which the board is so thick.

Then, i thought maybe i could add an OLED. OML bro, it so freaking complicated, so I am gonna adjust with the thickness

I started working on the case. Also btw i added another key and a knob to be more unique yk .

Tbh, fusion is the best cad software i have ever used, and u can see i have seen many from the time i have spent on my keyboard

I completed the PCB. It was pretty easy since I have a lot of experience from the KEEB ysws (i couldnt submit on time btw).

Idk why the guide did not have problems with the key pins overlapping with the microcontroller, well i had. So, I had to put it on the side, due to which the board is so thick.

Then, i thought maybe i could add an OLED. OML bro, it so freaking complicated, so I am gonna adjust with the thickness

I finally started work on the art for the characters! I have completed the player and player idle animation. Hopefully it looks fine, it was so hard to compress the entire steve skin into 16 pixels .

Anyways, I will start work on the walking animations soon.

Implemented the workflows for java and bedrock! Finding a tunneling service for bedrock is a hassle especially one with no registration and no time limits.

I had to settle on pinggy, which does have 1 hour limit, but no registration and easy setup is really attractive

For now, i think this is enough and i will start working on the website for documentation.

Implemented the workflows for java and bedrock! Finding a tunneling service for bedrock is a hassle especially one with no registration and no time limits.

I had to settle on pinggy, which does have 1 hour limit, but no registration and easy setup is really attractive

For now, i think this is enough and i will start working on the website for documentation.

OMGG!!! It finally worked!

I have ran a minecraft server on github actions that you can join easily! Technically its an eaglercraftX server, but still!

I have lots of plans for future projects using this knowledge i learnt by making this. For now, I’m gonna give the repo link and you can check if the server is running. If it is, u can join the link given in the logs by cloudflare. (dont forget to add the wss:)

https://github.com/rapidSpeed4652/Eaglercraft-Server

Andd soon imma make a gui in the website to start or stop the server and show stats like number of players online or smh like that.

Theres a problem tho, the world isnt persistant. While i tried making it, it didnt work and was taking way too long. I hope i can fix it later.

P.S i didnt put time on hackatime, but i swear i spent hours on this

OMGG!!! It finally worked!

I have ran a minecraft server on github actions that you can join easily! Technically its an eaglercraftX server, but still!

I have lots of plans for future projects using this knowledge i learnt by making this. For now, I’m gonna give the repo link and you can check if the server is running. If it is, u can join the link given in the logs by cloudflare. (dont forget to add the wss:)

https://github.com/rapidSpeed4652/Eaglercraft-Server

Andd soon imma make a gui in the website to start or stop the server and show stats like number of players online or smh like that.

Theres a problem tho, the world isnt persistant. While i tried making it, it didnt work and was taking way too long. I hope i can fix it later.

P.S i didnt put time on hackatime, but i swear i spent hours on this