@mishelkora27

Connected the wires to the switches and the U1 in the pcb. Had some trouble with placing the the components in a position where all the wires could be connected. Then once I was done with both sides of the pcb, both the red and blue wires, I moved on to the DRC and checked for any errors. I had to change the shape of the pads from oval to circle and make them smaller on the U1, which is the MOUDLE-SEEEDUINO-XIAO, because they were touching the wires and that was an error. Another error I ran into was the wires being too close to components on the switches so i had to move them and make them slimmer because they were 0.2mm away from the components. I had an issue with pad 3 of the U1 and pad 2 of the 6th switch being extremely close so once I moved U1 I had to reconnect some of the wires again.

After working for 2 hours, the app randomly closed down so I lost all progress. I had to reorganize the layout of the pcb and took this opportunity to change some things around and how it will look. Also made some space in the corner for an oled screen. Tried to connected the wires on the pcb but couldnt get the placements right so i deleted the wires I already have and will retry.

Downloaded the kicad files and uploading them. Had some difficulty with finding the files and organizing the keyboard switches.