@Kyuuby_

I finished the PCB!
I finally connected the pads and pins and distanced equally the keys(and debugged), now everything is ready and i gotta code the firmware.

I continued building the schematic and pcb of Tetrapack:

• I’ve finished(for now) the schematic.
• I added a 0.91 inch OLED display, i did some research and found out that my rp2040-zero can handle it without problem.
• Started arranging the pcb components in the C.S. Editor.
  And that’s it for today!

I started building my Macropad(Tetrapack)!
I researched a lot of things:

• what microcontroller/MCU i could use
• how to connect switch

THE DRONE IS WORK IN PROGRESS!
i officially started building the schematic of my Drone, im super excited for what it can become!
Today i started building the schematic:

• I wrote the USB-C plug for the esp32-s3 that im gonna use to control everything.
• I put down some others components like the AMS1117 to step down the 5V input that im gonna use to power everything.
  A big part of the recording is actually researchs about the components that im gonna use / i wanted to use.
  That’s it for today, see you tomorrow!

I FINISHED MY FIRST PCB!
I’m so proud and happy of my first pcb ( a simple esp32-usbA module) i know its nothing big, but im happy about the fact that i finally understood how to build PBCs.
It took around 2 and a half hours to learn/build /debug.

Im practicing how to build proper PCBs to make new projects, like the one in the title (rainbow six siege drone).
i watched a KiCad tutorial while building a schematic, i like it, and KiCad doesn’t seems to be that hard so far, i have great expectetion.