My awesome macropad!
Hardware- 5 Devlogs
- 15 Total hours
I’m building my first macropad by myself. I chose Ben 10 for the theme of it and I only put 4 keys because I didn’t want to use the matrix.
Finally I can say that I ve finished the 3d part, the pcb is okay (I’ve added the ReverseMount LEDs and wired them up). I ve decided that I’ll solder the case’s LED directly on the XIAO board so now I just have to do te firmware.
Still on 3d part, but MAYBE now I can start to think how to connect the LEDs to the pcb
I’ve continued the 3d part, now I have to figure out how to edit the pcb for the LEDs and to understand how much larger than the usbc port the port on the case is going to be.
I’ve almost finished the 3d part (I have to colour it and add the usbc port slot). After this I’ll have to write the firmware
Finally on the 3d designing for the macropad, first time to use fusion
