game_oflogic-gates20

devblog 20
so big news we are finaly finished with the whole simulation so chapter 6 is totaly complete but idk if i will wor on the ther cahpters because i alredy lerned all the stuff and just writing it is realy borring and in the end this website will teach nobody else so i dont see any reson why i shold do that but now it looks prety good and to be honest i used ai to correct my spelling mistakes since i hav dislexia but yea still need to upload the site and make a read me cause right now it is just localhost

hope you like it[-_-]

game_oflogic-gates19

so the full sim is almoast finish and most bugs from before are fixed still need to fix like 4 but that is ok and i need to add style cause this looks prety bad and i also lost my laptop charger thats why i needed to use a other one so i needed to do some things 2 times but now i found my laprop

hope you like it[-_-]

game_oflogic-gates18

so i finished all the board logic but not which label is on which sheet so i made how it should calculate evrything in the code because that should be the same as my chip now i will need to create a ui for that in 6.1 so that you can look what haapens when and where

hope you like it[-_-]

game_oflogic-gates17

1.3 finished and with that i finished chapter 1 only 5 chapters more to go
so this chapter is about all the other logic gates which i didnt explain in 1.2 and also has a plan how you can build these gates with the 3 base gates

probaply gonna do the full simulation first because then i can ship also if i am not finished
hope you like it[-_-]

game_oflogic-gates16

1.2 finished and all the logic to create most important simulations o now i can easaly inport a simpulation for every gate so 1.3 will be way easier then 1.2 and i finished writing everything and the simulation is working fine (i didnt want to code svgs so you get a visual sim sry because i am to stupid for this )

hope you like it[-_-]

game_oflogic-gates15

i wrote 1.1 What are logic gates in my website
(still need to fix spelling mistake)
i didnt wana put any simulations in it because that should be 1.2 and 1.3 so yea in the screenshots you can see the end result

game_oflogic-gates14

i fixed all errors in the schem file
so i fixed all the errors most of them where just power thinks but they are all gone we started like with 300 errors then i fixed them in a other devblog had still like 50 left and now i finaly fixed these also started working on the first explenation chaptor of the website

hope you like it[-_-]

game_oflogic-gates13

i just changed font and color scheme so now it looks way cleaner
idk what more can i say but i dont think i will be able to finish it but i will try my best

hope you like it[-_-]

game_oflogic-gates12

so i decided to make it a software project
why?: my project will be very expencive and if something isnt working i will lose all my funding also idk how much funding i will get so here is what i did for thi devblog i started creating a website with docs for my project the color scheme should be the one of a pcb board but i am not quite happy with it it should look like the rust docs but i got a ong way untill it looks that gud i also started fixing a lot of errors but then more apered so on the schem side it looking not that good i now need to fix 41 errors but i think i can do that in my docs there will also be simulations etc
and i am using svelte if you guys have nay idea what i should change to make it look better pls write a comment

hope you like it[-_-]

#game_oflogic-gates11

biig update!!!!!! we are almoast finished with the schmetics i did a speedrun and now there is a counter a clock a reset and a power module so yay you can see all the curguits below but still need to fix 32 errors and propably some other 2 and i need to see if i make a simulation for it next+ a website since i changed the type to a software project but yea we will look

hope you like it[-_-]

game_oflogic-gates10

Pretty crazy that i am alredy ad devblogs 10 but good
I added a Display
If you looked at My other devblogs before you maby noticed that WE alredy have a Display in the Keyboard but that is only the thinks you Type in so this Displaydisplays the simulaton i am also getting faster ad making mut’s and placing Labels (over 200 global Labels again)

Hope you Like IT[-_-]

game_oflogic-gates9

i finished the mux yay :
so i looked again what i still need and there are still a lot of thinks but this is one of the thinks and it was very very simple it basicly just implements start and stop button stuff like that i think you understand it if you want to look at the ogic gates and flipflops you can see the picture below

still got lots to do but i am doing my best to speedrun this
hope you like it[-_-]

game_oflogic-gates8

i finihed the button matrix
evrything is working is fine i dont think i need to explain what a button matrix is hard part was placing all 200 labels and rebuilding some thinks and nooooo i didnt use logic gates to create the buttons and led’s so i am realy sry for that (yking ofc)

thx for reading the devblog still got lots of thinks to do but i can make it
hope you like it[-_-]

game_oflogic-gates7

i finished the counter yay
so what is doas is pretty basic it counts and looks which piece it should calculate next it also looks if the whole the piece are at the boarder or not so yea if you see something in the picture below you dont understand jst ask me or follow the project or wait and wait a bit since i will probaply make a simulation website which describes the process

and biggest update no more fcking logicgates next thinks on the to do is led and button matrix and then we will look furher

hope you like it[-_-]

game_oflogik-gates6

so i aktually made a lot i finished making the ring in kicad thats just 14 8bit d-flip flops needed a bit time for that but thats finished now and i also fixed 218 errors so now i am only on 19 so thats pretty good wont explain evrything in deatail you can see most of the thinks in my pictures and if you have any question ten just comment and check the devblog like after 1 day then i probply answered it

hope you like it[-_-]

game_oflogik-gates5

i am finished with the digital software tried to wire flipflops and calc together corectly managed to do it so now i am back to ki cad where i alredy made that the calc is a own block and yea now i am just adding the flip flop and then we are almoast finished jippi
(only with that part that fucks my brain) we still need to do monitor and keys but that should be easy hopefully

hope you like it[-_-]

game_oflogik-gates4

brought all to digital so know i can simulate it much better then i needed to fix some problems that i had before but yea also made it a bit simpler so it looks very simple now also started working on my flip flop

hope you like it

game_oflogicgates 2

so i finaly understud that we dont need 2 different curcuts for the dead or alive status so here is what i did you can now enter all 8 values of the neigbors and if it is 3 it sets the value to alive if its 2 it stays the same and if its anything else its dead pretty simple so i just needed to place evrything down and label it corectly and i was finished

thought this project will take a eternity but i guess not
hope you like it[-_-]

game_of_logicgates2

so yea devblog 2 is a bit short but i did something important so i thought it was cheating to just use a full adder block or half adder block so i made them first and now i think i can use them as predefined blocks

game_of_logicgates 1

this is my new project jippi idk if i manage to finish it in time also because shools starts soon but i am making a little consol with a 1010 button grid and a 1010 pixel screen and making all the rest only with logic gates so yea
what did i do now i just thaught out loud how i can do all this so yea
hope you like it[-_-]