Morse Code Keyboard
Hardware- 3 Devlogs
- 2 Total hours
A morse code keyboard!
Hi! This project looks awesome, but you should make a few changes. Right now, your BOM is more expensive than it need to be. If you order the buttons, LEDs, resistors etc from ali express too, they are sound 30-50 cents instead of a couple dollars.
You should also make a PCB for this project! It will make it a lot more polished, and is a great way to develop the skills if you want to make something more complex in the future!
I adjusted the positioning of the button and LED on the CAD model. I still didn’t update the existence of the resistor, as that is pretty redundant.
I built the initial Morse Code Keyboard! Apparently I can’t code the CH32X035 using the USB-C cable, and I’ll have to do so using a WCH-LinkE. I’ll switch my project over to funding to afford that.
I CADed a model of the Morse Code Keyboard! I couldn’t find a .step file of the devboard Hack Club gave out (and that I’m using) online so I left it out. I also intentionally left out a case because I don’t want a case to dim the beauty of my creation. I didn’t add the resistor because I’m too lazy. Here’s the CAD, time to solder!
