stardance has been extended another month! the new deadline is october 31 :)

You are browsing as a guest. Sign up (or log in) to start making projects!

alarm clock

Hardware

By @_jacy

  • 2 Devlogs
  • 1 Total hours

a 4 key alarm clock

Source

@liam-newbill returned your funding request ?

Ok sorry I geniunely just don't understand how this will work/go together, can you please upload a .step with the pcb and display included? Also You can find a model for the display and dimensions here https://github.com/destroyer796/BLARE-Alarm-Clock/tree/main/Display

@liam-newbill returned your funding request ?

Thanks for updating the firmware, however I still need you to make some changes to the case. You can't rely on tape/glue for holding the plate down, you need to design something to hold it in place, whether that's screws, a clip, whatever. Also I'm still really confused about the packaging of your clock. Upload a .step of your assembly with all the electronics included. Is your display on the opposite side of the switches?

@liam-newbill returned your funding request ?

Hey, this looks cool but I need you to polish this more. Your case doesn't look to have any way to attach the plate, and I can't really see how your display is going to mount. You're also missing a screenshot of your schematic in your README, which makes it difficult to see if you wired it correctly. Could you also write some better firmware? Having a timer just count up doesn't really utilize anything.

Open comments for this post

@_jacy on alarm clock

33m logged

I have finished working on the case. There will be a top layer for the switches, then the bottom layer will be for mounting the pcb and hiding the electronics/cables in the back.

0
0
20

Delete project?

Are you sure you want to permanently delete this project? This action cannot be undone.

All devlogs, followers, and associated data will be removed.

Followers

Loading…