sudo wake-up
Hardware- 6 Devlogs
- 14 Total hours
For when you need root permissions to get out of bed.
Great job on this! Thanks for uploading all those files. I like the cutouts you used for the switches on the topplate, that's a cool design. Have fun building it!
Hey! You're missing your pcb design files (.kicad_pro, .kicad_pcb, .kicad_sch), and a .step file of your assembly, I need those to review this further. Could you also write up a BOM, including screws and everything? You can review the reqs here https://blare.hackclub.com/docs/submitting-your-project
Yippie! I made the firmware and its own wifi portal for setting the time and alarm, plus the button sequence needed to stop the buzzer. Lets gooo!
heyo guys! I basically added a bunch of details, like speaker holes, fillets, lid, charging port holes, etc.
I added a lot of details and heat insert holes :D
made a basic case :)
i routed the pcb :)
sudo wakeup Devlog
Today I worked on the planning and schematic for sudo wakeup :)
The idea is a digital alarm clock where, when the alarm goes off, you have to find a bug in some code to turn it off.
I had to improvise to fit all 9 buttons since I only have 6 pins for them, so I’m using a 3x3 button matrix with diodes.
I also figured out the TFT connections and started laying everything out in KiCad.
The buttons will be 3 on top, 3 on the left, and 3 on the right :)
