weather-node-stataion
Hardware- 2 Devlogs
- 1 Total hours
A weather station in cyberpunk design with a display, Temp. Sensor BME280, LEDs (showing system stats), Raspberry pi orpheus pico + esp32c3-mini
Ship #1
Pending review
This is a kinda long Devlog. I have not managed to cover all my Soldering and other work to be properly recorded with Hackatime.
Worktime in total is about 12 Hours, the images should be proof for it. For my DevLog I created a google drive folder with all the images to document my work.
https://drive.google.com/drive/folders/1_ZyLaowluevheELr0am4vLOseE-bGw4t?usp=sharing
Sadly, I also could not track the IDE time in Arduino IDE and Visual Studio Code via Hackatime.
Hope that after review I get my hours back.
What did I do today exactly? I finally figured out how, to make a timelapse and recorded me, while applying confirmal coating and short Protection to my project and then checked everything under a cheap microscope camera.
What’s next? Readme for the software, with detailed parts lists and Equipment I used, including as much details as possible. Then I am ready to ship this project!
Thanks for reading the Devlog!
I built a stand with wires for my station
