made the schematic for my project. i chose the xiao esp32 s3 because it’s small and good for this project, then wired all the leds (10 in total: 3 for the left indicator, 4 for the main brake lights, and another 3 for the right indicator). unfortunatly due to the lack of enough pins i decided to connect brake light 3 and 4 to one pin. i chose to connect almost all the leds to an individual pin because in the firmware the esp32 hosts a website where you can control each individual led and customize it as you want with other cool features. then i put a 2 pin connector wich will be used to connect the battery to power the project, and lastly an 8 pin connector wich will be used for the mpu 6050