Hackpad Palette
Hardware- 5 Devlogs
- 13 Total hours
A HackPad where you can switch colors on Paint for Microsoft 11
Great Work!
Hii! Great Work! Before this project can be approved there a few things that need to be updated! First, you need to add your .kidcad_pro, .kidcad_sch and your .kidcad_pcb into your PCB folder so people can see your work! Next you need to write your BOM as a .csv file!
COMPLETED GITHUB PAGE
Meanwhile making it I fixed a little issue on my case and it shoul work.
For me at least making the page was really tiring
Almost finished
finally I think I did it .
I made the pcb right.
I had to re do all the holes on the plate because the measures where wrong.
I will make the github page.
I hope this ends well
Finished Case and PCB
CASE
I Worked on the case of my project
I am undestanding how to do it
ALMOST FINISHED PCB
DEVLOG 1:
What I’ve done today
-I’ve done the schematic of the project
-and a little of the pcb
What I’ve Learned
-How to import a footprint and a device in easyeda
-How a keyboard works and their different types
-What is difference between SPI protocol and I2C
-and how to get a 3d and 2d visual of the pcb
