Smart Autonomous Obstacle-Avoidance Robot
Hardware- 3 Devlogs
- 1 Total hours
A smart autonomou Obstacle Avoiding Robot
This needs changes before we can consider it shipped. Review the Shipwright feedback, make updates, then ship again.
Feedback
Heyo! Your project looks cool, but it needs to be built in order to be approved. You should also reformat your repository according to Stardance's shipping guide.
Ship #1
Changes requested
I did the C++ programm for my robot , the programme here : int trigPin = 9;int echoPin = 10;int enA = 6;int in1 = 4;int in2 = 5;int in3 = 7;int in4 = 8;int enB = 3;void setup() { // put your setup code here, to run once: pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); pinMode(enA, OUTPUT); pinMode(in1, OUTPUT); pinMode(in2, OUTPUT); pinMode(enB, OUTPUT); pinMode(in3, OUTPUT); pinMode(in4, OUTPUT); analogWrite(enA, 150); analogWrite(enB, 150); Serial.begin(9600);}void loop() { long ditance = mesurerDistance(); if (distance > 0 && distance < 20) { arreter(); reculer(); tournerADroite(); } else { avancer(); } delay(50);}long mesurerDistance() { digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); long duree = pulseIn(echoPin, HIGH); long distance = duree * 0.034 / 2 return distance;}void avancer() { digitalWrite(in1, HIGH); digitalWrite(in2, LOW); digitalWrite(in3, HIGH); digitalWrite(in4, LOW);}void reculer() { digitalWrite(in1, LOW); digitalWrite(in2, HIGH); digitalWrite(in3, LOW); digitalWrite(in4, HIGH); delay(500);}void tournerADroite() { digitalWrite(in1, HIGH); digitalWrite(in2, LOW); digitalWrite(in3, HIGH); digitalWrite(in4, LOW); delay(400);}void arreter() { digitalWrite(in1, LOW); digitalWrite(in2, LOW); digitalWrite(in3, LOW); digitalWrite(in4, LOW); delay(200);}
The 3D conception of the robot
Smart Autonomous Obstacle-Avoidance Robot
