Hot swappable macropad
Hardware- 3 Devlogs
- 3 Total hours
I am building a hotswappable macropod/hackpad with 3x3 keys, 2 rotary encoders and all controlled by a Seeduino Xiao RP2040
Fixed a problem with the hotswap sockets
Great work! For next time, make sure that your kicad files are displaying the correct ones (there is a duplicate), make sure that the schematic is in /kicad files, and make sure that your shell is in the production files.
Excited to see the result!
Hey! Great work again, however, your production file is incomplete. It doesn't have the .step files for the different pieces of the case, rename production files/PCB.zip to Gerbers.zip, and include the firmware in there.
After that, resubmit, and I will review it again!
Hey! Great work on your Macropad! However, there is a stardance mission called Hackpad to make this project under. Start the mission and put it under hackpad and we can review this!
I finished working on the case *subject to change
Devlog#1. I am building a 3x3 macropad with 2 rotary encoders. The only difference that this has from the normal stardance macropad is that it is hot swappable, meaning you can take out and put in new key switches. I have finished working on the schematic and the actual pcb.
