very kewl macropad :3
Hardware
By
@jamallyemin
- 2 Devlogs
- 1 Total hours
a custom 3 key macropad with Seeed Studio XIAO RP2040, rotary encoder, OLED display, and WS2812B RGB LED
great work on this ! i can already tell this is gonna be the kewlest macropad ever
Great work on this indeed very kewl macropad! Before approving tho, could you please add some renders of the schematic and PCB in KiCad?
Hello!
This is an amazing macropad! However, you need to make a few changes:
1: Make sure that you have a good readme. It should go over everything. Use this as an example: https://github.com/qcoral/orpheuspad
2: Make sure that your PCB is made right! You need to move the SEEED to the top of the PCB.
Also, note that you'll need to supply your own buzzer, as Hack Club doesn't cover extra parts that are not approved under the Hackpad kit.
Once you make the changes that are required, we will have another look, and you will be **hopefully** approved if everything is right! :D
this macropad is indeed very kewl, but you need to make your repo match it ! You should organize it into folders and your also missing files - your README is pretty empty too - check out this guide on how to do these fixes !
https://hackpad.hackclub.com/submitting
@jamallyemin
on
very kewl macropad :3
29m logged
hai! I finished the pcb design and I like this one much more, I added buzzer,oled screen,rgb led and it’s much more kewler now :3 now I’m planning to make a 3d case for it on tinkercad probably
@jamallyemin
on
very kewl macropad :3
29m logged
#1 devlog!!👀 👀 👀
so far I’ve done the schematics and pcb, but im not very satisfied about these, I just think it looks too basic and not kewl!!!! so ill probably try to improve it add some oled screen or something.
