A fully functional 3D printed Nornir Chest replica with Arduino-controlled rune lighting, puzzle inputs, sensor-based artifact detection, servo locking mechanism, and mechanical moving components.
nice work, approved!
Worked on firmware and updated BOM. also posted on makerworld! https://makerworld.com/en/models/3198743-god-of-war-nornir-chest-hinged-lid-no-ams#profileId-3619555
super cool project! you're almost there- you just need to add prices to your BOM and your wiring diagram needs to be an actual diagram, not just be a table with pinouts. otherwise, looking good.
Hello!
You are still missing the submission structure. Refer to this link to check out what folders you should have: https://stardance.hackclub.com/resources/shipping-hardware.
In addition, all of your 3D Model files should be .step, instead of a .stl file.
Hello! Please make sure that you are adding all the parts that are to do with the firmware and the PCBs that you are talking about into the GitHub.
Once that is done, we will have another look!
In addition, please make sure that you are following the structure when you are submitting a project: https://stardance.hackclub.com/resources/shipping-hardware
Finally printed all of the print only parts! Looks awesome. Still waiting on electronics.
Really cool project Andrew! Your wiring and a bit of your README.md looks AI generated, so if it is please write it in your own words. Also, please export your BOM from google sheets as a csv and upload it to git. Also Also please add some file organization to your project and make your zipped files into to unzipped folders.
user request!
really sick project! right now its a little hard to tell how you are using the 4 projects you credit in your README. can you add some info to the readme to explain?
id also like to see some info in the readme on how the wiring and electronics for this project work. you should have a wiring diagram image!
lastly, you should add the .blend file to your repo. resubmit when you have fixed these!
I’m submitting this for funding! I am broke and cant pay for the electronics lol. I also printed out a few parts. It needs a little post prosessing but looks great!
Almost done with Bambu Studio. Putting together files for a fully 3d printable model too, no electronics, no base.
Printed base, supports are way to crazy and areas are too weak, tweaking and reprinting. Also starting to add some more work to the bambu studio portion of the project.
Done with everything! I decided to do the bell instead of rune rock because I realized it wasn’t actually a rock, it was a statue, and I don’t want to spend 2 hours sculpting it. Prepping it in bambu studio, almost ready to start printing! Attached photo of statue to show you what I mean.
Done with both brazier and spinning totem! On to rune rock and then wire paths and electronics.
I’m choosing to use a different base, it just looks cooler, and also the other base had all these random strings of internal vertices. Also worked a little on the spinning rune activator/totem.
Added reed switch to brazier, I downloaded a nice blades of chaos fridge magnet, that can be inserted into the top. So hopefully when the magnetic blade gets inserted the reed switch will activate and send a signal to the arduino.
I’m adding a little brazier with a led rune that will turn off when activated, and send a signal to the chest to also turn off one of the lights. Once three runes are activated the chest’s servos will activate and it will be able to open. Almost done with brazier, need to add some more coal on the top.
The chest has a base now! The base is so big it has to split into fourths to fit on the printer bed 😂. It is ~700 grams. I also added indents in it that will fit a breadboard, battery pack, and wires. I’m going to be using a nano on the breadboard. I could just stuff all the electronics in the chest, but then i wouldnt be able to fir anything inside, so I’m just doing this. I also think it looks awesome and I need to add some of the puzzles that unlock the chest around it, so the base is perfect. Got the base off of makerworld - https://makerworld.com/en/models/2679972-rocky-base-plateau#profileId-2967898
made a boulder for the rune puzzles that unlock the chest.
Added a new gold engraving.
It locks now! Will be using mg90 servos that turn 90 degrees, making the lid unable to open.
Added runes! Looks great. Going to be using WS2812B Led rings, and I’m going to 3d print a cover thing for it that will disperse the lighting as it only has 7 leds per ring.
Added hinges and a gold engraving on the top of the lid. Looks great, moving on to head and leds for runes.
Finally progress. I’m not adding scales onto the dragon, but it actually still looks good.
I spent 4 literal hours trying to put scales on the dragon curve. I give up, it will be ugly in blender.
Spent forever making dragon curve thing.
Adding side dragons p1
Added Rune holes to the chest base.
Cleaned up vertice mess. and started adding some stuff.
Started building my 3d printable Nornir Chest from God OF War. Just basic details right now.
.webp)
