AirPoint

As I have already made the AirPoint, so I am trying to make a YT video and today a captured the uploading of code, instead I got to know some new errors in the code which tbh were solved by AI but only 30 % of solving was done by it, the remaining was solved by me…. Now I am going to 3d print a case for it…

Troubleshooting the firmware or code….

Did nothing much today but found a website which could help complete my project.

Finallllyyyy…. The PCB work is completed, This is how it looks, Below is the design of The complete PCB, this is to be mounted on the Case which I have already made and the PCB users will need to solder the buttons with wires as they are on a certain height and the PCB lays down….

Started making the PCB which is purely optional for users, if they want this is for them or else it can work without PCB too, soooo as u can see below that the schematics for PCB is done according to me, and now I have started designing the PCB…..

Nothing great but, due to some technical and software problems, there was some issue with Kicad, so today I did some setup related to Kicad also started making the schematics for my project that is AirPoint….

Hey there!! Today I did some Cad work, took all the raw stl parts from my Github repo and then sliced them, also made a circuit diagram in a random website named Wokwi (or Wokvi) smt. I did great work today though. :) , Here is the circuit diagram or schematics for AirPoint, and a Case with a Lead and some caps for 12x12mm tactile Pushbuttons which perfectly fit in the holes in the case…

I started the coding part of this project and ended it today itself, and yes I do accept that the code I wrote was not 100% made by me, I took the Raw material (code) from ChatGPT and then did some additional changes. U can say that I did 60% code and ChatGPT did 40%. Also I made this beautiful (from my perspective) zine page for AirPoint.