My Musicpad! - Stardance

@panda returned your funding request ? · 2 months ago

has this not already been funded by outpost ? you can finish the build and then submit it here for stardust :3

@panda returned your project · 2 months ago

This needs changes before we can consider it shipped. Review the Shipwright feedback, make updates, then ship again.

Feedback

This is not a finished build yet ! you need to finish it and update your repo and demo link !

@1 returned your funding request ? · 2 months ago

returning this as it has been funded by outpost! submit your build when you are done building!!

Ship #1 Changes requested

@Omelette on My Musicpad! · 4 months ago

I made a quick hackpad for funzies and because i got burnt out from another project. This is for listening to music, and I also just wanted an excuse to build a hackpad. I learnt how to use cad and work with the kmk library and programmed with circuitpython. I havent built it yet so im hoping to build it IF THE FORM STARTS WORKING /hj. Anyway this was really fun.

1 devlog
4h build
Hackpad

Video of Project → See source code →

Open comments for this post

@Omelette on My Musicpad! · 4 months ago

3h 39m 2s logged

So well I essentially did everything in this one sitting. I already had done the schematics before 6 motnhs ago, so i just had to redo and refine the schematics and design. This still took a while, but atleast it is polished and good. The cad was next, I used the dimensions from the circuit and followed the guide, and managed to make the bottom pretty quickly. I also then did the top, which required a bit of math to see where to put the switch and knob holes. I then added in the screw holes and exported it. I then started working on the firmware, which i used kmk for. I first of all imported the library and got a script working, then i used some moduels to get the media stuff and rotary encoder working. Overall solid 0.5/10 process would do again(was actually really fun to build).