Fixing small things on my parts!

I got things printing (yay!) however I noticed some things. I didn’t leave any clearance for the wires on the servos, so it didn’t actually fit on the base. For the servo attachment, I forgot to design a mirrored version. Ima upload my new files to github for @skhsmrn to print :)

Bracelet PCB!
Just finished the routing and design for my bracelet, it includes an esp32-c3, some accelerometer, though I have a similar one, and a b2b connector for my lipo battery. I had to edit the footprint of the esp32 because the antenna outline was clipping my edge cut, giving me some errors. All together, the esp32’s antenna will sit on top of the pcb anyways.

I added cutouts to the side to make it easier to attach the ribbon. I have also included my reference for a better idea.

Very quick design for the electronics, it’s a walkman! I made holes for the usb cable/battery and the wires running through.

I finished the CAD for the sides of my headphones! I made a mock of the servo to show how it’d fit in assembly. Next would be designing the box of where’d the wires and connectors go to while I wear it, it’s going to be Walkman themed :)