keyboard

Took way too long but I added 3d files for the pcb to use as reference when designing the case. So I added the cherry mx switches and stabilizers. I decided not to add the keycaps because it probally won’t be necessary for refernec for the case and will take a lot of time

finished designing the pcb. I layed out the diodes, wired everything up, added a gnd fill on everything and had to fix over 200 DRC violations 😭😭

had to restart the whole pcb design(i did it wrong😭😭😭😭). Anyways, I finished laying out the keys on the pcb, the edge.cuts and the position of the raspberry pi pico

finished the schematic and started laying out the pcb. PCB taking way too long though.

I worked on my keyboard key layout / design and internal design. I also set up the kicad wakatime for next time.