Heya! Amazing work! Before this project can be approved, you need create a CAD folder including .step files not .stl since they are not modifiable! Next, you have to create a BOM (bill of materials) and store it in a .csv format! Lastly, you need to create a production folder in Github with ur CAD, Firmware and PCB!

great work on this ! unfortunately, you still need to make a few changes !

could you add a pic of your schematic to your README before resubmitting? this helps me make sure everything is correctly wired !

Also, your production folder should be a folder in the github with everything ready, not just a .zip - people should be able to immediately click into it and have all files they need

You need your firmware done before you submit - it needs to be done in advance ! also please add a production folder - you can find a guide on what should be in it here :

https://hackpad.hackclub.com/submitting

good work on the file organization but you basically ignored everything else ! your README still lacks pictures and you dont have a production folder ! Again, please read this :

https://hackpad.hackclub.com/submitting

its so helpful !

this repo is very lacking, it has no file organization whatsoever and is also missing files !

your README is also basically empty, please check out the sumbission guide at :

https://hackpad.hackclub.com/submitting

and follow it ! do the checklist before resubmitting and you should be good to go :D

nice job on the hackpad! rigth now you dont have a .step file of the case or any images in your readme. please read through the hackpad submission guidelines to learn what you need in each folder + the readme!