@Metal

I have designed the pcb and the 3d case. I used kicad for pcb and i got the library and other files from the guide. It will have 5 buttons one rotary encoder and one 91 inch oled the controllec will be seeeduino xiao. For the 3d model i made it rectabgular opened screw holes gave a cool design made the knob and found a keycap online.

It turned out amazing. I built the robot but the power cables came out of the weld sloppy welding on my part, tomorrow i will try to weld the cables. Before the cables came out i tried out the code but it didnt follow the line its probably because i didnt put front wheels but tomorrow ill try to fit it into the chassis as right now its too small.

i made the schematics for the robot

i have made the 3d chassis of the sumo robot, i looked at other sumo robots, the parts that are generally used and modeled it precisely. this is just a prototype though. Now i plan to make the schematics and what parts it will need.

i worked on the schematics and the parts that i will probably use. Mainly took insperation from the guide. later i will design the pcb and the casing

I made a schematics of the line follower, now the components and wirings are more clear, i have also put the latest code into the github code folder. i have not made the robot yet so i might do little changes once i make it

i fixed up some models. My design process started with looking at other chassis’es. I designed a entirely new one and stayed on this look. even the wheels and the molds were 3d modeled to make it more craftable. I put the 3d models on the github and did little changes

i got my first prototype printed thanks to my teacher at technology workshop, what im gona do next is use a substitute for the silicone and mold the wheels. i just hope its size and holes are good it should be approximately 180 mm x 100 mm. ( i also tried to resize it smaller but i realised i didnt need it) BTW i havent built it yet

i have scaled the mechanism so it wil be to size in real life after printing. i also designed a housing and how it might look as the finished project. i will later start searching for parts like servos and motor drivers

i am working to create the way that servo motor will be able to close and open one panel, i sketched it on paper and saw a similar system so i adapted as i need it, the orange circle is the hinge which will act as a guide and the orange part will be attached to the red rectangle but be able to move. i had better models on my other account i will try to get acses to it.

ive been working to make the 3d chassis and a 3d demonstration of the final product. i havent been able to record any of this time since i did it on my phone i was not home for the time being, anyways it turned out great in my opinion i sent it to my teacher to print out the wheels, chassis, motor holders, wheel and the silicone wheel mold. i already made up what parts i need so i will wait for funding