It’s perfect first try, they say. It wasn’t, but that’s fine, we can fix it. Welp I forgot to add some pullup resistors on IO2, IO3 and the boot button, no worries I can do it myself. In the pcb I have added the resistors, obviously that’s not going to magically make it’s way to the real board, and the traces won’t do that either, it’s just a plan. So I have soldered on the resistors myself to the board. I also forgot to add a decoupling resistor to the GPS, so I’ve added that to the PCB as well, I haven’t soldered it on yet as I’m still deciding how, I think I’m going to solder it onto the test pads. I also had to do a botch trace removal to remove a short on the GPS so I’m hoping I didn’t kill it.