Aligned keycaps/OLED and edited case to better fit components. After working on the top plate for a while, I realized that a lot of my parts were clipping (e.g. diodes and microcontroller), so I cut away parts of the plate to make things fit. I improved my method for aligning components after having the align the keycaps on the switches (I spent a long time trying to align the original keycap to the origin before just calculating the displacement to where I needed it to be). After putting on the top plate, I raised part of the bottom plate to make a cutout for the USB-A port and raised the OLED screen. I also started working on the decorative top plate that’ll go onto top of everything.