Created PCB and started work on assembling in CAD. I had to scale down the amount of keys and remove the LEDs because there weren’t enough pins. I spent way too long searching for OLED and Rotary Encoder symbols while making the schematic before I realized that they just need the footprints paired with generic symbols from the default library. While routing the PCB, I learned that the red and blue wires are for different layers and assigned footprints to the diodes so they would show up (I forgot to do that while working on the schematic). After aligning most of the parts in Fusion, I realized that one of the switches and the rotary encoder were overlapping and that I could just export the PCB as a .step file from KiCad.