So today I mainly worked on my pcb and Bom, I first started by making the BOM for the project and finding the cost of everything I would need, The main cost for this project are for the main flight computer which is around $400 which is crazy but I have someone who works at jlcpcb who sponsored an old project of mine and could help me with this, Other than that I need around $270 for the main rocket but I think I can bring that cost down. Also after asking for help in a reddit rocketry channel I was recomended to use an off the shelf flight computer because it wouldn’t be a good idea to put a brand new flight computer in charge of pyrotechnics. For that I chose the Eggtimer Quantum which is a cheap $40 flight computer which will control the pyro charges. I also worked on the pcb and solved some drc errors, and finished routing some small resistors and whatnot, I still havent heard anything about the missing lapse for the pcb but we will see, For now the final things will be to finalize the BOM wrap everything up.