So today I mainly worked on the CAD model, I modeled all the body tubes centering rings and started work on the avionics bay , I’m going to use around 1/4in wood as bulkheads and use 3/8th threaded rods that hold everything together + 2x 3/8 steel u bolt to attach the parachute lines too. The main avionics sled will be 3d printed and will hold the flight computer. Now After though I decided to make a new flight computer for this rocket because the previous one is more tailored toward my TVC rocket and doesnt have things like telemetry which I need. I main reused a lot of the schematic from the first version of the computer but I switched to an STM32H743VIT6 which was a bunch more gpio pins which I need, I also added a Ra-02 for telemtry, and has an ATGM336 gps, the imu and barometer is still the same as my old one, and it has multiple pyro and servo channels. Other than that I’m going to start doing to routing tmrw and I might do some to today maybe?
Other than that I’m going to start making the BOM and finalizing the Cad.