Finished and fixed schematic

In this period of time I found myself stretched apart by school assignments, tests, and community as well as other projects in need of my attention.

So yeah, it’s a bit delayed.

I finally finished the schematic and fixed it.

• Removed the switch for the gnss module because there was no free gpio on the ht-ct62.
• Battery sense moved from GPIO3 to GPIO0
  • GPIO3 is the LoRa radio’s interrupt line inside the HT-CT62, so it now has a no-connect flag.
• Decided on Keystone 1042 as the holder for the battery.
• Added the esd protection for the usb-c
• Added a fuse, and IC protection circuits to the charging circuit just in case
• Added an LED to the CHG on the BQ24074RGT, so it would indicate charging and stuff
• Ran the ERC, added power connector flags cause KiCad didn’t like it
• Assigned footprints.

If anyone sees any errors, I’d appreciate any advice.