another devlog!

UPS HAT

• onboard power switch is a tiny physical switch and there is NO seperate gpio header for it :( so the panel power button will have to wire in parallel (or cut off the switch)

Power button

• turns out its an RGB pushbutton (im blind) and not single color, but I have decided to keep it since it looks good and I will be only wiring the green led line

OLED + GPIO resolved !

• I got the real KickPi 20 pin diagram with correct pins
• OLED: i2C4 on pins 9/13, no adapter needed
• rotary encoder: assigned CLK/DT/SW/VCC/GND to free pins
  -2 indicator LEDs: one PWM-driven (dim HDD activity light, pin 10) and one plain GPIO (battery/low-battery warning, pin 12), found by confirming actually has 2 real PWM channels broken (Pin 8/10)

Docs

• finalized README, finalized BOM, finalized pinout.txt

Paper sketch thing

• I documented my planned organization and placement for all the parts on paper

everything else

• I made some updates to the BOM to use 2 usb hubs also added a rotary encoder and some other stuff
• the rest of the stuff thats still open is what material to use for the case mounting stuff and cable management

Stardance doesn’t seem to support markdown CSV ??? so here’s a screenshot, its also on the repo here